, ,

RAM DDR3 8GB/1600 KINGSTON – KVR16N11/8

Availability:

52 in stock


د.إ160.00

52 in stock

Estimated delivery date 2020/06/03

KVR16N11/8

8GB 2Rx8 1G x 64-Bit PC3-12800 CL11 240-Pin DIMMManufactured by Kingston

DESCRIPTION

This document describes ValueRAM’s 1G x 64-bit (8GB) DDR3-
1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory
module, based on sixteen 512M x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR3-1600
timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
contact fingers. The electrical and mechanical specifications
are as follows:

FEATURES

  • JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  •  800MHz fCK for 1600Mb/sec/pin
  • 8 independent internal banks
  • Programmable CAS latency: 11, 10, 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (interleave without any limit, sequential with
    starting address “000” only), 4 with tCCD = 4 which does not
    allow seamless read or write (either on the fly using A12 or
    MRS)
  • Bi-directional Differential Data Strobe
  • Internal (self) calibration: Internal self calibration through ZQ
    pin (RZQ: 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C,
    3.9us at 85°C < TCASE < 95°Cº
  • Asynchronous Reset
  • PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

 

BRAND

SPECIFICATIONS

CL(IDD) 11 cycles
Row Cycle Time (tRCmin) 48.125ns(min.)
Refresh to Active/Refresh
Command Time (tRFCmin)
260ns(min.)
Row Active Time (tRASmin) 35ns(min.)
Maximum Operating Power TBD W*
UL Rating 94 V – 0
Operating Temperature 0o
C to +85o
C
Storage Temperature -55o C to +100o C

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “RAM DDR3 8GB/1600 KINGSTON – KVR16N11/8”

There are no reviews yet.

Recently viewed products